STAND ALONE MULTI-FUNCTION DIESEL DRIVE
Compressor - Battery Booster - Battery Charger - Welder - Generator - PTO Port
The RAPTAIR-MF Is Six Systems In One!
This decreases the parts that require servicing and make maintaining those parts easier and less expensive. The RAPTAIR-MF not only has a welder, an air compressor, generator and battery booster/charger in one system, it also has an open center hydraulic pump to support hydraulic cranes!
- 12/24/36/48V Batter Booster/Charger
- 45 CFM Air Compressor
- 7 kW Generator (single phase)
- 300 Amp Welder
- Crane Hydraulics 7.5 GPM @ 3000 PSI
FEATURES:
MOUNTING OPTIONS:
- Sidepack or deck mount
SHARED FUEL SUPPLY:
- The Raptair-MF is integrated with your truck's diesel fuel system, eliminating the need for an additional fuel tank
COMPRESSED AIR:
- Belt driven, VMAC oil-injected rotary screw. 45 CFM@100 psi, max psi 150
ELECTRIC POWER:
- 120v AND 240v
HEATERS:
- Engine heater and hydraulic reservoir heater
DISPLAY PANEL:
- Monitors and displays engine and air compressor status
CRANE REMOTE:
- Uses Maintainer's crane remote, tethered or wireless, as is, no need to change or retrain the operator
MORE CARGO SPACE:
- The elimination of additional systems allows for more cargo capacity in your truck, providing space to transport valuable equipment and supplies!
SPECIFICATIONS:
|
Compressor Type: |
Belt driven, VMAC oil-injected rotary screw, 100% duty cycle |
| Rated Air Capacity: | True 45 CFM @100 psi (150 psi max) |
| Weight: | Approximately 585 lbs (265 kg) |
| Dimensions: | 23" (W) x 33" (L) x 29" (H) |
| Engine: | Kubota diesel D902 3-cylinder, naturally aspirated 3,600 rpm Tier 4 final compliant |
| Fuel Supply: | Chassis fuel tank tied in with booster pump |
|
Cooler (Engine & Compressor): |
Integrated |
| Electrical Output: |
AC: 20A 120V duplex receptablces at 2,400 W One 7,000W continuous single phase 60 Hz output, 240V output DC: (for battery boost/charging, other DC loads) 12V, 24V, 36V, 48V selectable, 300A capable Welding: CC mode for SMAW and GTAW (stick/TIG welding) CV mode for GMAW and FCAW (MIB/flux core welding) 300A DC-70% duty cycle, 200A DC-100% duty cycle |
| Intelligent Digital Control System: |
Remote mounted generator/welder control panel 2-speed throttle control System will shut down engine when air is not needed, and automatically restart the engine again when air is required (adjustable time delay) Optional 15 foot remote current pendant control, separate selector switches engage compressor, generator, welder and PTO (any function or all 3 can be selected at any time) |
| Cold Climate: | 120V, tested to -40° C |
| Warranty: | Two years on all major components (engine warrantied by Kubota) |
| Air Receiver Tank: | 17 gallon |
Request More Information
Fill out the form below and we'll get back to you in no time flat!